WELCOME TO GROUP OF ENGINEERS:
With increasing demand for innovative mobility solution we believe an orientation towards proper design principals is of paramount importance. “The management team of GOE training division is dedicated to bring top class industry oriented training and people empowerment programs to the shallow talent pool to take up challenging careers in core engineering sector. GOE Training offers a professional value based Industry oriented training and brings its long standing legacy of experience in successfully training and mentoring engineers to take up challenging careers in core engineering ( Automotive, Aerospace& Defense, Heavy Engineering/Off-Highway , Consumer & Health Care, oil & gas). With this initiative, we are trying to bring our experience based learning rooted in tried and tested in strong pedagogic techniques for effective learning and knowledge building. Group of Engineers with its strong experience offers rich – guidance and help students achieve their aspirations & desired goals for successful professional Careers. Group of Engineers has articulately designed in development of critical thinking skills and successful application of learning in practical real life situations. The courses are taught by the best of practicing engineers who have gained extensive experience in their respective technical domains. With rapid progress of technology Group of Engineers is well equipped for hard core focused training and skill enhancement of students/Trainees. Superior Imagination skills, Design Skills and Engineering skills are the key factors for success of students by enabling them continuously innovate and keep ahead of the competition. Our Highly Qualified Practicing Engineers well versed in product Design (CAD) and Virtual Simulation (CAE) are the most important resources & pride of our company and entire Industry.
The training division is focused to provide seamless support to all its trainees for their aspirations to successfully enter the Industry, re-skilling for the entering new domains and moving up in the career ladder.
Industry Oriented Training Courses for:
1. Product Design By using CATIA V5
2. Product Design By using UNIGRAPHICS
3. Product Design By using PRO’E’
4. FE Modeling & Basic Analysis By using HYPERWORKS
Product Design Course By Using : CATIA V5
Product Design Course By Using : UNIGRAPHICS NX
Product Design Course By Using : PRO`E` (CREO)
FE Modelling & Basic Analysis By Using : HYPERWORKS
Advanced CAE Analysis & FE Optimisation
About Courses (CAD):The primary objective of the course is to impart promising engineers with basic principles of design and their innovative application to the practical design problems. The emphasis will be on requirement study, solving & conceiving the design from concept through final stage i.e. manufacturing feasibility studies. Concepts such as axiomatic design approach to solve engineering problems will be introduced.
Trainees are also made aware of importance of Engineering fundamentals & application to concepts of design. The Live projects provide the engineers the needed hands – on experience to model mechanical components and assemblies starting from the conceptual design all the way to detailed drawings with all dimensions and tolerances specified as per the industry best practices & norms.
The course is structured into 5 topics spanning over a period of 4 weeks (140 – 160 hours). The topics are carefully designed and each of them is spread across interactive lectures, exercises and project work. The course is taught by experienced project engineers from Group of Engineers services Pvt Ltd and other Industry experts. The projects are carefully chosen to encourage the student to apply the concepts learned in each module and evolve his/her own strategies to effectively solve the problems.
Introduction to Design:
Overviews about the design process – form & Function, Engineering drawings, understanding of the basic mechanical concepts and their application for best industrial practices.
Functional Design Basics:
DIntroduction to various design fundamentals, design axioms and the architecture of modern 3D – CAD tool forms the major content.
Introduction to Technical Domain & Industry Practices:
The topic covers Design for manufacturing (DFM) best practices used in the discipline of Plastics, Casting & Sheet Metal. The course enables the student to bring their design together, provide logical constraints to visualize and stimulate their product in a virtual space. Students are also introduced to strong GD&T; principles and Manufacturing feasibility studies of their conceived Designs.
The course includes the following Technology modules:
- Part Modeling
- Advance Part
- Sheet Metal
The course imparts fresh graduate engineers with a strong foundation of Engineering fundamentals, high proficiency & best practices of Finite Element Modeling and Finite Element Analysis for mechanical system design. The course focuses hands–on experience to practical engineering application using CAE tool such as HyperMesh, Ansys, Abaqus, Radioss/Nastran. The course is structured on Group of Engineers proven workshop based integrated learning approach i.e. combination of Instructor led lectures, concept reinforcing practice exercises followed by application focused projects to integrate the learning. While the carefully structured exercises help to understand and reinforce the Modeling/Analysis concepts using HyperWorks, the projects help the students to evolve effective strategies to solve practical problems, keeping in view real world time and project management constraints.
The course is structured into 09 Modules spanning over a period of 4 weeks (140 – 160 hours). The modules are carefully designed and each of them is spread across lectures, exercises and project works. The course is taught by experienced Practicing Engineers of Group of Engineers. The projects are carefully chosen to encourage the student to apply the concepts learned in each module and evolve his own strategies to effectively solve the problems.
The Course Modules:
Introduction to CAE:
Introduction, Importance & Value addition of CAE, Career & Opportunities in CAE, understanding the different pages like 2-D page, 3-D page, panel, sub panel, most commonly used icons etc.
Need and importance of Geometric Clean up, and importance of each panel in Geom page with their usage. Eg. Nodes, lines surfaces, solids & Quick edit options.
Mid – Surface Extraction:
Importance of Mid – Surface, different ways of extraction (Both Manual and Automatic.
2-D Shell Modeling:
Learning to use some basic important panels like ruled, spline,drag (manual methods). AutoMesh, quality index etc. Meshing for BIW components with right mesh pattern, flow, capturing of holes, fillets. Meshing for BIW components for CAE attributes like NVH Meshing criteria, Durability criteria or crash criteria. Meshing for plastics or components with variable thickness, capturing when the midsurface fails, different techniques and best practices.
3-D Tetra Modeling:
Correct usage of tetramesh panel, creating the solid tetra model from scratch, Mesh modifications, capturing of R-Trias etc.
3-D Modeling HexMesh:
Capturing some complicated junctions with large variations. HexMeshing at component level with required quality criteria and mesh pattern.
Connectors and Model Assembly:
Importance of connectors, Most used connectors. Deck preparation for Radioss, Nastran, Abaqus etc.
Introduction to FEA (Linear Static & Normal Modes Analysis):
Boundary conditions, Load cases creation, understanding the syntax of the solver, Running a Linear static Analysis & Model Analysis.
WOULD YOU LIKE TO SEE YOURSELF HERE………..??????
Excellent Job Assistance
100% Guaranteed Placements Assistance. Our trainees have been placed in leading Core Industries and MNC’s.
Industry Oriented Curriculum for aspiring Engineering Graduates & post-Graduate
Course contents have been designed comprehensively by Industry Experts, Industry Bodies & Association and get updated based on.
Multiple Career Specialization Tracks
Offers Specialization in both Product Design, CAE ( Virtual Validation) and Manufacturing Engineering.
Domain Focused Training
Our Training is focused on major job opportunities domains like Automotive, Aerospace & Defense, Heavy Engineering/Offhighway, Consumer & Health care, Oil & Gas etc.
TALK TO US:
Give a Missed Call to :
Mobile : +91-77025449900 (You will never be missed)
Landline : 040-41416900
WRITE TO US:
WEBSITE : www.groupofengineers.com
Hi.. I must thank GOE for having me blessed with this opportunity to share my pleasure with you all. In my words, success is not the position we secure, but it is the knowledge we acquire in the pursuit of perfection & acheivements and in that sense it is largely subjective. With the support from GOE I gained knowledge to perfection my career and got placed in a good company. Thank you GOE.
|ANKA RAJU |
After completion of my B-Tech, I had no clue what to do with my career. One of my friends suggested GOE. I joined them and with in a span of two months I got an opportunity to work with one of the best MNC in Hyderabad. Thanks to GOE.
First of all I would like to thank GOE for giving me this opportunity to share my views. GOE is one of the best training institute we have in Hyderabad .Here, they not only train us but with full dedication they guide us and help us to be placed with good organization.I can just thank for GOE which made me to secure a good job in one of the best organizations.
Hi,everybody. Congratulations to you all to have visited the GOE website and getting to know about it. You are at your success door step. This is what I can say about GOE. The faculty here is very dedicated and even the management strives hard to place there students in best organisations. I would welcome you all to GOE. Thanks to GOE for giving me this opportunity to share my thoughts.
After completion of my B.Tech, I was in search of a job and consulted many placement centres but of no use. And, finally i got to know about Group of Engineers and came here. As, you see now, i am placed in one of the best organisations. GOE is one of the best training and placement centre in Hyderabad. I am thankful to GOE for giving me the honour of expressing my gratitude towards it.
|B.KIRAN KUMAR REDDY|
- We provide customized training as per corporate expectations.
- Industry Oriented Curriculum & Pedagogy
- Multiple Tracks of Specialization in Product Design, CAE & CFD.
- Technical Domain Focused Training.
- Trained & Mentored by Industry Expert/Practicing Engineers panel for Design Training and executing the curriculum.
- Industrial Visits and Live Experience.
- Excellent Job Opportunities & Placement Record.